Fiat 500 Key Fob Replacement
If your 500 key fob stops working Try a different one to see if your vehicle can detect it. If it does, the issue may be related to the battery or water damage to the original fob.
Replace the battery first. Make sure the new coin cell battery is properly inserted, with the «+» side facing down inside the fob.
Dead Battery
The majority of the time, when a fob isn’t working it’s just because the battery is dead. This is a simple fix and most fobs will warn you when the battery is getting depleted. You can find instructions for the majority of car fobs YouTube or in the owner’s manual. You can also take it to a locksmith in your area or Fiat 500X key fob programming the dealer who supplied it to you to replace it.
Sometimes, a device stops working due to a fault on the circuit board inside. This is a bit rare however it can occur. If you drop the fob on something sharp, it could cause damage to the internal chip. It could occur if you use an aftermarket fob and the key doesn’t work. In this situation it is essential to see a dealer or locksmith to get the key reprogrammed to make it compatible with your 500.
One 2012 FIAT FIAT 500 flip key remote — Looks-alike Ilco with lock, unlock and trunk buttons — new replacement keyless entry (will require cutting and program by locksmith).
Chips that are damaged
fiat 500 replacement key near me 500 key fobs are wireless devices that transmit a signal to the car when you press the button. It has a microchip which contains the information that will allow it to communicate with the car. If the chip is damaged, it can’t send the correct code, and the car won’t start. It’s possible to repair this kind of damage and a locksmith can assist. United Locksmith can complete this repair on both classic and newer models, so do not be afraid to contact us.
Locksmiths can program a new key fob. It’s less expensive to do this instead of going to the dealer and it works just as well. You’ll have to provide some details to the locksmith, such as the year your car was manufactured and its model.
Rub the chip with an old dollar bill if you’re not sure what to do. The copper in the bill is abrasive enough to take away oxidation and dirt however, it won’t cause damage to the microchip. The chip might not be repairable in the event that it has been physically damaged. This can happen when you drop it or run it over by your vehicle.
Water Damage
Whether you accidentally dropped your keys in the pool, put them in your purse while swimming at the beach, or splashed them with water during a rainy day you can be sure that your fob will have some water damage. Even if there’s only an ounce of water on the key, Fiat 500X Key Fob Programming it could cause serious issues with the electronic components of the key.
You can usually fix this issue by taking the fob off and cleaning it with a towel. Once the fob is dry you can replace the battery. It should then start working properly.
You can also take it to an auto shop or locksmith to get it professionally programmed and cleaned. These experts can use special equipment to make sure that the key fob works with the computer system in your car.
If your Fiat 500X Key Fob Programming 500’s main fob isn’t working, it can be frustrating and stressful. It is tempting to go to the dealer to get your key fob replaced however, this can be expensive and unaffordable. Locksmiths can handle all aspect of your car’s key fob replacement without the necessity of a dealership visit. They are a far better choice than the dealership.
Pairing Issues
If you drop your keyfob, or it stops functioning and nothing else seems to be wrong, it may be the chip. This could be due to water damage or a dead battery. it could just be that you need to reprogramme it.
This can be accomplished by simply following the directions in the owner’s manual. If you’re having difficulty or your manual isn’t working and you need to have an auto locksmith do this task. This will ensure that the chip is not damaged, and it’s the most affordable alternative.
Some 500 owners have also reported that their keys won’t allow them to lock their cars. This can be a problem if you want to fill up at an gas station. Some owners have complained that the locking system of their 500 failed and they’ve required replacement of the entire intermediate steering shaft. Fiat has actually cited this problem in an technical bulletin (TSB).
If you’re having problems with your Fiat car, an experienced locksmith could help. They will duplicate your current key or make you a brand new one that is able to lock and start the car. They can do this without ever seeing your previous key and are usually much cheaper than getting it from the dealership.