Elyse Roussel спросил 8 месяцев назад
Why Buy a 10kg Front Loader?
The front loader of 10kg is perfect for large laundry loads, with plenty of space for large wash cycles as well as 13 wash programs including handwash. It’s a smart machine equipped with the latest features.
Front loaders typically take longer to wash, aren’t available in larger capacities and often be prone to mould and mildew. They are more energy- and water efficient than top-loaders.
Energy
The main energy expense in a front loader of 10kg is the power used to heat water to operating temperature and for running the motor. These costs can be offset by lower energy consumption during operation as compared to top-loaders, with less power used during the agitation cycle and during spin, as well as less water. Some machines offer low-water cycles that use less water than the cotton cycle. This helps save water and energy.
In general, true front-load washers use less detergent than top-loaders, and the tumbling motion in the drum entrains air to reduce foamy suds and overflows without lessening cleaning action. The door seals and the bellows of top-loaders are more prone to wear. In addition, the top-loader’s mechanical agitator could cause significant wear and abrasion to clothes, since it pushes clothes against each other with paddles that constantly drop and drag them through the wash. The amount of abrasion is measured by the amount of fabric that accumulates in a clothes dryer’s lint filter, since lint largely consists of loose fibers that have been absorbed by clothing during drying and washing. To reduce this, many top-loaders are constructed to operate at a slower speed and might have a «freshening» cycle to periodically clean the mechanical gears and bellows.
Water
Top-loading washers require an impeller or agitator in order to push soap and Washer water through the clothes, which causes wear and abrasion. In contrast, front-loaders employ paddles that gently lift and lower clothing inside a spinning drum for cleaning, which reduces wear. The amount of lint that is in the dryer lint filter can be used to determine the rate of wear. Lint is mostly made of threads that are removed from clothing during drying and best washing machine 10kg.
Front-loading machines are less likely to leak since they have lower levels of water than top-loaders. True front-loaders might require a bellows seal or seal to keep water from getting out of the door [Redirect-Java] during operation, however these systems usually do not require maintenance as regularly as their counterparts on top-loaders.
Furthermore, front-loaders can work with hot or cold water and a majority of them without the need for a heating source, which makes them more energy efficient than top-loaders. This efficiency can lower the cost of running the same laundry load, particularly in areas where detergent, water and energy are expensive.