Emily Ehrlichmann спросил 7 месяцев назад
Protect Your Pride And Joy With The Ghost Immobiliser
Protect your pride & joy from theft by using the Ghost Immobiliser. This system is discreet & does not require any additional key fobs to operate.
The device utilizes buttons in your vehicle (steering wheel, door panels & centre console) to create a unique pin code sequence that can be up to 20 presses long. This allows your vehicle to begin.
Simple process to change the PIN code
With the rising rate of vehicle thefts, many owners are looking to upgrade their security. There are many types of aftermarket security devices available, from tracking systems to alarms and immobilisers. However, not all of them are equally effective in protecting your car. A tracking device can assist you in locating your car if it is stolen, but it will not stop the crime. Immobilisers, on the contrary does exactly what it says on the tin: it disables the engine of your vehicle so that it cannot be started. The Autowatch ghost immobiliser review immobiliser is one of the most advanced options available on the market, making it virtually impossible for thieves to steal your vehicle.
By using the buttons that are already present in your car The ghost device is able to create an unique sequence that must be entered prior to the engine starts. This can be done using the indicator stalk, window or heater buttons. There is also a mobile app that can be used as an emergency PIN override, which allows the driver to operate their car without the button sequence. This feature is particularly useful when you need to surrender your car for valet parking or servicing because the immobiliser is activated, but not disabled.
The Ghost is an innovative and unique device that works by using the buttons on your vehicle rather than as a separate unit. It’s not just an effective deterrent for vehicle theft, but it can be used to secure any future vehicles you may own. This makes it a far better investment than a traditional wheel lock.
Weatherproof small device
The Autowatch ghost immobiliser is a high-tech security device that protects your car from key cloning, hacking and ECU swapping. It’s a small weatherproof device that communicates with the ECU of your vehicle directly via the CAN bus to stop the motor. It can be plugged into the vehicle without wiring and has been thoroughly tested to ensure compatibility with all vehicles. It also is resistant to jamming devices, which are a common technique that car thieves use to circumvent immobilisers.
The advantage of using CAN data is that it runs silently in comparison to conventional systems. It isn’t detected by sophisticated RF scanning or code-grabbing technologies and is likewise unreadable by conventional diagnostic tools. The Autowatch ghost does not produce LEDs, but instead utilizes the buttons in your vehicle such as steering wheel, centre console or door panels to create a unique, changeable disarm sequence. You can make this sequence up to 20 presses long to provide additional security. The iPhone app allows only one connection, and comes with a unique pairing code for the Ghost. All communication between the two devices is encrypted.
The Ghost will stop car thieves from putting in an ignition key that is not in use or replacing the ECU to bypass the immobiliser. It will only allow the engine to start only if the correct pin code is entered. It is also possible to put it into valet/service mode for a temporary operation (with set parameters such as 30mph speed limit) to allow you to hand your car over to a valet service for servicing without the need to enter a PIN code.
Tested for each vehicle
The Autowatch Ghost is a first-of-its-kind aftermarket immobiliser CANbus. It can be connected to the wiring of your vehicle and also to the engine control unit (ECU). The device is able to intercept signals and prevent your car from operating normally until you enter a customized code. The system can be activated and deactivated by using your smartphone’s application without the need for additional wires.
The standard factory immobilisers function by using a transponder that is embedded in the key. It transmits a message to the ECU. If the correct code is transmitted the car will start however if the transponder is swapped with one from another vehicle the immobiliser will not recognise it. This makes it possible for the vehicle to be stolen and then started. The Ghost immobiliser has been developed by a South African company at the forefront of vehicle security systems technology. It protects your vehicle from key cloning, hacking and even key theft. The only way a thief could take your car is by physically towing it away, and even then they would not be able to drive it.
Ghost makes use of buttons on your vehicle, such as the indicator stalk, steering wheel, as well as the doors, to generate unique PIN codes which must be entered to use your car. This is performed without the need for additional hardware like a key-fob and can be as long as 20 presses long. It is also unrecognizable by devices for diagnosis and transmits radio frequency signals, meaning thieves are not able to use sophisticated RF scanners or code-grabbing technologies to identify that the system has been set up.
In contrast to the physical devices that prevent theft, such as clamps or wheel locks, ghost car immobiliser is hidden within the vehicle, so it cannot be removed or disabled by thieves. It is also harder to remove from a car alarm which requires disarming via the use of a button sequence. This makes it a fantastic addition to an GPS tracking device which can be used to track your vehicle after it’s been stolen.
Override of emergency PIN code
You don’t need to look far on social media sites to find stories or even videos of vehicles that have been stolen by car thieves employing the latest technology tools available to them. This includes key-cloning devices as well as hacking tools that allow them to start the vehicle with your original keys.
Our Ghost immobiliser is designed to stop this and offer an additional layer of security to prevent your vehicle from being targeted by thieves. It creates a unique pin code push sequence using your existing buttons on the steering wheel, door panel, and centre console. This unique PIN has to be entered along with your original key fob to prevent the vehicle from starting. The unique override pin is found on a black card that you receive following your installation. It is easy to remember because there aren’t any LED indicators.
The device is hidden within the vehicle’s wiring and doesn’t emit radio signals. This means it can’t be detected using diagnostic software that can tell what type of security systems you have installed. This makes it a great alternative to an alarm.
Contrary to most security systems, which have a relay inside the engine bay these CANBUS Immobilisers communicate with the car’s ECU and BCM via CAN data bus (brand dependant). This allows them to disable a vehicle completely by sending a digital block to the ECU and engine.
These systems can also be linked to an analog alarm immobiliser, tracker or alarm. This must be specified prior to the installation. They also work with service/valet modes and a great alternative to a tracking device when you bring your vehicle to the dealer for repairs to an electrical issue.
Service/Valet Mode
In recent times, ghost immobiliser there has been a increase in the number of vehicles that are stolen without owners’ keys. With easy access to key cloning tools and door lock pick sets, it is now much easier for thieves to take your pride and joy. To stop this, we have launched the Autowatch Ghost immobiliser that prevents your vehicle from being driven despite the fact that your keys have been cloned or your vehicle was stolen.
It communicates directly to your vehicle’s ECU (Engine Control Unit) via the CAN data circuit. It is completely silent, since it doesn’t use radio frequencies or key fobs. It cannot be detected using diagnostics or any other hacking device. It also protects against adding the key to a new one or replacing the ECU to get around the system since only the correct PIN code will allow the engine to start.
The device is hidden inside your car using existing buttons on the steering wheel, the centre console and door panels. Before you can start your car, you need to enter a unique and changeable PIN code up to 20 numbers.
This is the very first aftermarket CAN-bus immobiliser that has been developed. It can prevent your vehicle from being started or driven if you don’t enter a PIN code first. If you are driving away with the device in motion, an indicator will appear on your dashboard and flash continuously for about 300m. Entering your PIN code will deactivate the anti-hijack. Your car will continue to function as normal. If you do not enter your PIN code at this point, the indicator will continue to flash and require another PIN code for every attempt to start your vehicle.