Kristopher Birrell спросил 8 месяцев назад
Protect Your Pride And Joy With The Ghost Immobiliser
Ghost Immobiliser will safeguard your valuable possession from theft. This system is discreet & does not require additional key fobs to operate.
The device makes use of the buttons in your vehicle (steering wheel, door panels & centre console) to create a unique, changeable pin code sequence that can be up to 20 presses long. This will then allow the start-up of your vehicle.
Simple change of PIN code
With the increasing rate of vehicle theft, many owners are seeking to improve their security. There are many kinds of security products that are available for sale including tracking systems, alarms and immobilisers. However, not all of these are equally effective in protecting your car. A tracking system may aid in finding your car if it is stolen however, it won’t stop the crime. Immobilisers, in contrast perform exactly as they say on the tin — they disable your car’s motor to prevent it from being started. The Autowatch Ghost immobiliser is one of the most advanced options on the market, making it virtually impossible for thieves to steal your car.
The ghost immobiliser cost device utilizes the buttons on your car to generate a unique sequence which must be entered in order for the engine to start. This can be accomplished using the indicator stalk windows or heater buttons. There is also a mobile app that can be used as an emergency PIN override, ghost immobiliser installation allowing the driver to operate their vehicle without the button sequence. This is especially beneficial if you have to surrender your car for valet parking or servicing because the immobiliser is activated and not disabled.
The Ghost is an unique and innovative device that works by using the buttons of your vehicle instead of as a separate unit. It is not only an effective deterrent for vehicle theft, but it can be used to secure any future vehicles you own. This makes it a more cost-effective option than a traditional wheel lock.
Small, weatherproof device
The Autowatch ghost immobiliser is a high-tech security system that guards your vehicle from key cloning, hacking & ECU swapping. It is a tiny weatherproof device that connects with the ECU of your vehicle directly over the CAN bus to stop the motor. It can be plugged into the vehicle without additional wiring, and has been thoroughly tested to ensure compatibility with all vehicles. It is also resistant against jamming devices, which are a common technique that car thieves use to circumvent immobilisers.
The benefit of CAN data over conventional systems is that they work silently. It cannot be detected using sophisticated RF scanning and code-grabbing techniques and cannot be recognized by conventional diagnostic tools. The Autowatch Ghost does not use LED indicators and instead uses buttons on your vehicle, like the steering wheel, centre console or door panels, to create a an unique sequence of disarming. The sequence can be extended up to 20 presses for extra security. The iPhone app is limited to one connection, with an individual pairing code for the Ghost. All communication between the two devices is secured.
The Ghost stops car thieves from adding a new ignition key or replacing the ECU to bypass the immobiliser. It will only allow the engine to run when the correct PIN code is entered. It is also possible to put it in valet/service mode to allow for temporary operation (with specified parameters, such as a 30mph speed limit) so that you can transfer your vehicle to a valet service or for maintenance without having to enter a PIN.
Each vehicle is tested
The Autowatch Ghost is the world’s first aftermarket immobiliser for CAN bus that can be connected to the wiring of your vehicle and connects to your engine control unit (ECU). The device detects signals to stop your car from starting normally until you enter a specific code. The system can be activated or deactivated through your smartphone’s application without the need for additional wires.
The standard factory immobilisers function with a transponder which is built into the key. It transmits a message to the ECU. The car will start if the correct code is sent. If, however, the transponder of a different vehicle is used instead, the immobiliser doesn’t recognise it. This allows the vehicle to be stolen and started. A South African company that is at the forefront of car security systems technology created the Ghost immobiliser. It shields your vehicle from key cloning, hacking and even key theft. Only by physically towing your vehicle away from thieves could they get it and not be able drive it.
Ghost makes use of buttons in your vehicle, like the indicator stalk, the steering wheel, as well as the doors, to generate a unique PIN code which must be entered to use your vehicle. This is not required to use additional hardware like a key-fob and can be as long as 20 presses long. It is also inaccessible to devices for diagnosis and transmits radio frequency signals, which means thieves are not able to use sophisticated RF scanners or code-grabbing techniques to determine if an installation has been made.
Ghost Immobiliser Installation is more difficult to get rid of than car alarms, which require disarming with several buttons. This makes it a great addition to a GPS tracking device which can be used to locate your vehicle after it’s stolen.
Override of emergency PIN code
You don’t have to look far on social media to see stories or even videos of vehicles that were stolen by car thieves employing the latest technology tools available to them. This includes key-cloning and hacking tools that allow you to start your car without your original key fobs.
The Ghost immobiliser was designed to combat this and provide you with an extra layer of security to keep your vehicle from being targeted by thieves. It creates an individual pin code push sequence using your buttons on the steering wheel, door panel and the center console. The unique pin code is entered alongside the original key fob to prevent the engine from starting. The unique override pin is found on a black plastic card which you will receive following your installation. It is simple to remember because there aren’t any LED indicators.
The device is hidden in the wiring of your vehicle and does not emit radio signals. This means it can’t be detected using diagnostic software that can tell what type of security systems you have installed. This makes it a fantastic alternative to an electronic device for tracking.
In contrast to other security systems that rely on a relay located in the engine bay, these CANBUS immobilisers communicate via CAN databus (brand dependent) with the ECU and BCM of the car. This enables them to shut down the vehicle completely with the use of a digital block of commands to both the ECU and the engine.
It is also possible to connect an analog immobiliser, alarm, or tracker to these systems, however this must be stated prior to the installation of the device. They are also compatible with valet and service modes, and are is a great alternative to a tracker device when you bring your vehicle to the dealer for repairs to an electrical problem.
Service/Valet mode
In recent years, there has been a rise in the number of vehicles that are stolen without owners’ keys. It’s easier than ever before to take your joy and ghost immobiliser Installation pride thanks to the availability of key cloning tools & door lock picks. We’ve developed the Autowatch Ghost Immobiliser to combat this. It blocks your vehicle from being driven even if your keys have been copied.
It connects directly to your cars ECU (Engine Control Unit) through the CAN data circuit. It’s completely silent since it doesn’t use radio frequencies or key fobs. It isn’t detected by diagnostics or any other hacking device. It also protects you from adding the new ECU or key to bypass the system, since only the PIN code allows the engine to be started.
The device is hidden in your vehicle and is accessible via buttons on your steering wheel, centre console, and door panels. A unique and changeable PIN code sequence up to 20 digits must be entered prior to being able to start your vehicle.
This is the first aftermarket CAN bus immobiliser to be designed to stop your car from being moved away or even started in the event that a PIN code hasn’t been entered before. If the device is armed and you attempt to drive off it will display an indicator on your dash, which will flash continuously for about 300m. If you type in your PIN code at this point it will deactivate the anti-hijack and your car will continue to drive just as normal. If you do not enter your PIN at this point, the indicator will continue to flash and require a new pin code every time you try to start your vehicle.