Repairs to uPVC Windows
uPVC is a fantastic option for modern homes. They are durable, long-lasting and easy to maintain. They are not susceptible to rot or rust like aluminum or timber.
It is crucial to wash and oil UPVC doors and windows regularly. This will reduce costly repairs and improve the efficiency of energy.
1. Broken Glass
The broken glass in your windows could cause severe damage to your home and even be fatal. It is essential to ensure that your windows are in good shape.
For single pane windows it is relatively easy to replace windows, and the new one is usually able to fit into the old frame very easily. However If you have double pane windows that are anchored by internal beading, it’ll be more difficult to remove the existing panes and install new ones. In this instance it is essential to purchase plastic spacers in order to make sure that the new pane fits into the window frame.
Wearing eye protection and thick gloves is a must for anyone who plans to remove the glass by yourself. You should also lay down a dropcloth before you begin working on the window panes so that any shards fall on the fabric and not onto the floor, where they could be trampled under.
It’s a great idea seal the gap after the glass is removed. This will prevent drafts and water from entering your property until a professional comes out to fix the window. It also acts as a barrier that will prevent any intruders from gaining entry to your home. If the distance between the window and the door is substantial, you may want to use a security screen that also has a window. This will give you the best of both.
2. Sagging
Upvc windows and doors are a low-cost, durable and energy-efficient alternative to timber sash windows. However, with time, they are susceptible to a range of issues, including sliding. A sagging window in uPVC could cause issues with light, draughts and even security. If you notice that your uPVC window is beginning to shrink, it’s crucial to act fast to stop the issue from getting worse.
Repositioning the hinges could aid in fixing a window which is sagging. First, you’ll need to open the windows so you can get at the frame. Then, using a screwdriver, you can remove the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. Close your window to test the fit after having repositioned your hinges. If you’re happy with the fit, you can tighten the screws to ensure that they stay in position.
If you are unable to move the hinges, you could have to replace the seal. Over time, rubber seals lose their elasticity and dry out which causes them to loosen. It is important to replace your seal as quickly as you can in order to ensure that your Upvc door Repairs near me window waterproof and draughtproof.
uPVC handles could also loosen. This is usually due to screws that have become undone over time, but it could also be due to the mechanism of the handle wearing out. It’s a good thing that it’s simple to fix the loose uPVC window handle yourself. First, you’ll need close the window and then perform an experiment fit. The joint at the corners of the sash should align with the joint on the casing. If it isn’t then you can make use of a screwdriver to loosen the handle and turn the mechanism back into the position it was in.
3. Water Leaks
It is important to take action if get up each morning to find a smoky wall and wet floors. Water leaks from windows are not just a cause for degradation of your home’s structure but also hinder your efforts to regulate the temperature inside your home. Most often, uPVC window leaks are caused by damaged or missing sealant.
This is a relatively easy fix and Upvc door Repairs near me should be undertaken by any competent DIYer. Depending on the severity of the problem the old caulking may require removal before a new layer is applied. It is crucial to remember that when it comes to uPVC window repairs, you should avoid the temptation to «over-caulk’ as this will only make the area harder to clean and could reduce the efficiency of your energy.
It is crucial to make sure that the drainage holes are clear of debris and that the sill pan is angled correctly so that it drains away from the window. In more serious instances, you may need to replace the window.
Mold spots and rotted sills are other signs of water leakage. This fungus thrives under conditions of dampness and can spread quickly throughout the house.
It is also important to note that if the leakage originates from the glass of your double glazed windows, it is more likely to be a problem with the glass seal rather than the frame or sliding. A uPVC specialist can easily fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.
4. Faulty Hinges
Hinges may be to blame if your uPVC window is difficult to open, or if it opens with a breeze. Any competent DIYer can replace these in a matter of minutes.
Like any mechanical component, hinges can wear out over time. It is very easy to change the hinges on a window, but it’s easier if someone else helps you hold the frame.
Check that the uPVC hinges are open and closed in the correct direction. Look for the arrows on each hinge to determine which direction the window should be opened.
The issue could be caused either due to opening the window in the wrong way or by a poor installation in the factory. Sending us a picture via our website will often solve the issue. We are happy to provide suggestions.
Regularly lubricating the hinges is also necessary. Applying a light engineering lubricant on the hinges is a good way to do this. We suggest using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window to operate and close more smoothly. It can also reduce the possibility of a window sticking and help prevent corrosion. Ideally, you should do this at least once a year. WD40 and other solvent based lubricants are not recommended as they will damage parts of your uPVC window.
5. Draughts
Draughts can be caused by different causes. The hinges can also be misaligned due to wear, causing a gap between the frame and sash. These can be easily repaired by giving them a good clean, but in the event that they are beyond repair it may be necessary to get them realigned or replaced. In addition, the interlock could also become unbalanced. It is located on the hinge side and may need to be cleaned. In some instances it is possible to replace these.
These seals are susceptible to wear and tear or become damaged over time, allowing air escape. Replacement of these with high-quality weatherstripping is a good way to keep draughts at bay. Replace the upvc windows with low-emissivity glasses. This will help regulate indoor temperatures and decrease the possibility of draughts.
The last way to reduce draughts effectively is by using a draught-excluder. These are typically fabric tubes filled with a filler, which can be put on top of your window sill. They will help stop cold air from entering and keep your home warm and cosy!
Your windows made of upvc will remain a great source of insulation and security to your home with regular maintenance and repairs. It is crucial to keep in mind that all windows will eventually get worn out and it may be cheaper to replace them rather than repair them. If you are experiencing problems with your upvc windows, it’s recommended to seek help from a professional as soon as possible.