Zac Pigdon спросил 9 месяцев назад
How to Replace the Replacement Key Battery For Saab Car Key Replacement the saab ignition key 9-3
Saab owners have to follow a series of specific steps to add a second ignition key. This requires a handheld computer, called Tech-2 that is operated by the dealer. Then the transponder must be replaced and a key are required to be purchased.
It is an excellent idea to rotate your keys so that one doesn’t get damaged faster than the other. This will also keep your keys in good condition.
Replacement Case
The new key fobs aren’t like the old Saab keys. They’re equipped with electronic devices that make them difficult to copy. This has made car theft much more difficult than it was twenty years ago. It has also made it more expensive to replace keys lost.
Saab 9-3 owners should have two keys working. It costs a fortune to replace a lost key because it requires replacing the CIM module, and reprogramming the locking cylinders. Dealers will typically charge $100-$200 to complete this.
There are some ways around these expensive. Some parts suppliers will look up the code on a spare key (usually the same one that opens the doors and turns off the ignition) and cut a brand new metal key blade at a fraction of the dealer’s cost. The key, however, must be identical to the original in order to function in your car.
You can also change the case yourself by following these steps. You’ll need a flathead screwdriver and some patience. With the screwdriver, slowly break the plastic and remove the emergency key from the case. Once the case has been opened remove all electronics and put them in your new case. Insert the correct key and badge inside the case.
Replacement Battery
The Saab 9-3 replacement battery is a low-cost component that can be easily and quickly replaced. This YouTube video by Cyclone Cyd demonstrates the procedure for replacing the remote fob battery with only four steps. This tutorial should work for any modern saab key fob however, the procedure may differ slightly.
The first step is to find the button that lets off the backup key inside the fob. It is usually located just below the saab car key replacement (https://Minecraftcommand.science/profile/iconberet7) logo on the back of the fob. Use a flathead screwdriver to insert the screwdriver into the tiny hole in this button. This should be enough to allow you to open the fob case so that you can replace the battery.
After the new battery CR1632 is in place then you can reassemble your remote key fob. You can then program it to your car. The entire process should take no more than a half hour at the most. This is a very easy process that doesn’t require any special tools.
The procedure is a little more complex if you lose the key, but it’s possible. The dealer has to determine the VIN of the car and then order a replacement key blade and TWICE module with the proper unique code. After that, they will need to cut the replacement key and then program it with a new software tool called MDI.
Replacement Key Fob
The key fob comes with a battery that is used to lock and unlock your car. Batteries are able to last for a short time and eventually will die. This is a typical issue that affects all cars and the good news is that you can change the batteries in most fobs, without replacing the entire case. Amazon sells replacement fobs that have all the electronic components installed. You can simply open the case and replace the batteries. It is important to remember that you’ll have to take out the emergency key first, and you can do this by inserting the small screwdriver flathead into the slot located in the middle of the case. The case should split when you rotate the screwdriver around it.
If you’re about to replace your keys, ensure you have a spare, as this will reduce the total cost by a significant amount. If you have an additional key, you can request the dealer to cut it and program it for your car. This is much less expensive than purchasing a new key fob.
If you do not have a spare key one, you can add another key to your car, however this requires a lot research and effort. It costs a few hundred dollars to get a second car key. The computer of the car also needs to be programmed. Professionals can do this however it’s a costly option.
Replacement Ignition
The new SAAB 9-3 is a more sophisticated alarm system built around a key code. If you lose your primary key, it could be expensive to add another one since the car must include a computer and be programmed to accept a brand new key. Locksmiths typically aren’t able to program this and dealers will charge hundred dollars to program the new key!
Dealers will charge you the highest price to replace your car’s computer (also known as the CIM or SAAB twice) in the event that you lose the only working key. We can reprogram the EEPROM in your car computer to make it ready for an extra key. This will save you more than 50% of the cost you would have to pay the dealer.
If you’ve owned a SAAB 9-3 for many years you are aware that the ignition keys are not very durable. If your ignition key isn’t functioning properly, you must look into replacing it. They can become extremely sticky and the buttons can fall off. Luckily, replacing the ignition key isn’t as complicated as it seems and is fairly easy to do with the proper tools.