Etta Jose спросил 6 месяцев назад
Protect Your Pride And Joy With The Ghost Immobiliser
Ghost Immobiliser will protect your valuable possession from theft. This system is discrete and does not require additional key fobs.
The device makes use of buttons on your vehicle (steering wheels, door panels and centre console) to generate a unique pin sequence that can be changed up to 20 times. This allows your vehicle to start.
Simple PIN code Change Process
With the rising rate of vehicle theft, many owners are looking to upgrade their security. There are many different types of security gadgets that are sold aftermarket that range from tracking systems to alarms and immobilisers. However they do not all are equally effective in protecting your car. A tracking device can aid in finding your vehicle in the event of it being stolen however, it won’t stop the crime. Immobilisers, on the other hand does exactly what it says on the tin: it shuts down the engine of your vehicle so that it is unable to be started. The Autowatch Ghost is one of the most advanced options available, making it nearly impossible for thieves steal your vehicle.
Using the existing buttons in your car The ghost device is able to create an exclusive sequence that has to be entered before the engine starts. This can be done via the indicator stalk windows or heater buttons. In addition it is possible to use a mobile app which can function as an emergency PIN code bypass and allow the driver to operate the car without having to use the button sequence. This feature is particularly useful if you need to hand your car over to a valet service or parking, as the immobiliser is activated and not disabled.
The Ghost is a very unique and innovative device that is used in conjunction with the buttons of your car rather than as a separate unit. This means that it is not only a highly effective security measure against theft from your vehicle but it can also be transferred over to any future cars you may have, making it more of an investment than traditional steering wheel locks.
Weatherproof, tiny device
The Autowatch ghost immobiliser is a high-tech security system that guards your car from key cloning, hacking & ECU swapping. It is a small, weatherproof device that communicates with the ECU of your vehicle directly over the CAN bus to stop the motor. It can be installed in the vehicle without the need for extra wiring, and has been thoroughly tested to make sure it is compatible with all vehicles. It is also resistant against jamming devices, which are a common method used by car thieves to get around immobilisers.
The benefit of CAN data over conventional systems is that they operate in a silent manner. It isn’t detected by sophisticated RF scanning and code-grabbing technologies and cannot be detected by traditional diagnostic tools. The Autowatch ghost doesn’t produce LED indications and uses the buttons in your vehicle like the steering wheel, centre console or door panels to create a unique, changeable disarm sequence. You can even create a sequence that is as long as 20 presses to provide additional security. The iPhone app allows a single, authorised connection using a pairing code that is unique to the Ghost and communication between the two devices is encrypted.
The ghost immobilisers prevents car thieves adding an ignition key replacement or replacing the ECU in order to bypass the immobiliser. The engine will only start if a valid PIN code is entered. It is able to be operated temporarily in Valet/Service mode (with parameters set, such as 30mph speed limit) which means you can give your car to valet or service without entering an entry code.
Tested for each vehicle
The Autowatch Ghost is the world’s first aftermarket immobiliser on the CAN bus that can be connected to the existing wiring in your vehicle and connects to your engine control unit (ECU). The device detects signals to prevent your car from starting up normally until you enter a customized code. The system can be activated or deactivated by using your smartphone’s application without the need for additional wires.
The standard factory immobilisers function by using a transponder, which is integrated into the key. This transmits a signal to the ECU. The car will start if the correct code is sent. However, if the transponder of a different vehicle is used instead, the immobiliser will not recognise it. This makes it possible for the vehicle to be stolen and started. The Ghost immobiliser was created by a South African company at the top of security systems for vehicles technology. It guards you against key cloning or hacking, and even key theft. The only way that a burglar could steal your car is physically towing it away, and even then they would not be allowed to drive it.
ghost ii immobiliser uses buttons on your vehicle, such as the indicator stalk, the steering wheel, as well as the doors, to generate a unique PIN code that must be entered in order to use your car. It does this without extra hardware, such as keys fobs. It can take up to 20 presses. It is also undetectable to diagnostic equipment and does not transmit radio frequency signals, which means thieves are unable to utilize sophisticated RF scanning or code grabbing techniques to discover that the security system has been installed.
Unlike physical anti-theft devices like clamps or wheel locks Ghost is hidden within the vehicle to ensure that it can’t be disabled or watch removed by thieves. It is more difficult to remove than a car alarm, which requires disarming via the use of a button sequence. This makes it a fantastic complement to a GPS tracking device, which can be used to locate your vehicle after it’s been taken.
Override of emergency PIN code
You don’t need to look too far on social media to see stories or even videos of vehicles that have been stolen by car thieves using the latest technology tools available to them. This includes key-cloning and hacking tools that allow the vehicle to start without the original keys.
The Ghost immobiliser helps combat this and gives you an additional layer of protection to stop your vehicle from being stolen if it is targeted by thieves. It generates a unique pin code by pressing the buttons on your steering wheel, door panel and centre console. This unique PIN must be entered in conjunction with your original key fob to stop the vehicle from starting. The unique override pin can be located on a black card that you will receive after the installation. It is simple to remember because there aren’t any LED indicators.
The device is hidden in the vehicle’s wires and doesn’t emit any radio signals, which means it isn’t able to be recognized by thieves using diagnostic software that can identify the security system you have installed. This makes it a fantastic alternative to a tracker.
Unlike most other security systems that have a relay in the engine bay, these CANBUS Immobilisers connect with the vehicle’s ECU and BCM via the CAN data bus (brand dependent). This enables them to shut down the vehicle completely by sending a digital block of commands for both the ECU and the engine.
These systems can also be connected to an analog alarm immobiliser or tracker. This should be specified prior to the installation. They are also service/valet mode-compatible and are a great alternative to a tracker having your car in for repairs to an electrical issue at the dealers.
Service/Valet mode
In recent years, there has been a increase in the number of vehicles that are stolen without owners’ keys. It is easier than ever before to take your joy and pride due to the availability of key cloning tools and door wiki.klglover.com lock picks. We have developed the Autowatch Ghost Immobiliser to combat this. It prevents your vehicle from being driven even if your keys have been copied.
It connects directly to your car’s ECU (Engine Control Unit), via the data loop called CAN. It’s completely silent since it doesn’t use radio frequencies or key fobs. It cannot be detected using diagnostics or any other hacking device. It also prevents the addition of a new key or replacing the ECU to bypass the system, since only the correct PIN code can allow the engine to start.
The device is hidden within your car and can be accessed by existing buttons on your steering wheel, centre console, and door panels. Before you can begin your car, you need to enter a unique, changeable PIN code up to 20 digits.
This is the very first aftermarket CAN-bus immobiliser for the market that was developed. It will prevent your vehicle from being driven or started in the event that you do not enter a PIN number first. If the device is armed and you try to drive off it will display an indication on your dash, which will flash continuously for about 300m. If you type in your PIN code at this point it will disable the anti-hijack system and your vehicle will continue to drive as normal. If you do not enter your PIN at this point, the indicator will continue to flash and require a new PIN code every attempt to start your vehicle.