Kindra French спросил 8 месяцев назад
Ghost Immobiliser Problems and Ghost Immobiliser Problems Solutions
We save for years to buy a car. It can be very depressing when your prized possession gets stolen.
However, if you’ve had the ghost immobiliser installed by a reputable fitting company such as Car Theft Solutions, it can prevent thieves from driving off with your vehicle in a matter of minutes.
1. No Stop/Start
The Autowatch Ghost CAN Immobiliser was designed and developed as one of the most efficient security systems on the market. It works by using buttons from the centre console or steering wheel, as well as pedals to enter a pin code into the vehicle’s system, which will then disable the engine. This will stop thieves from taking your vehicle, even if he’s got keys or fob.
The Ghost is equipped with security measures to prevent the device from being stolen by thieves or hacked. This includes CAN bus blocking and cutting the immobiliser. Together with an insurance approved marking system, the chances of your vehicle being stolen are virtually nonexistent.
This system also works with your vehicles factory fitted immobiliser to add a second additional layer of security making it impossible for thieves to start your vehicle even in the event that they have your keys or fob. This helps to protect the value of your resales and keeps you and your family safe.
If your ghost isn’t working, it could be an indication of other issues not Ghost related. Try entering valet or service modes on your Ghost to test this. This will disconnect your Ghost from the car and you will be able start the car. If you are not able to do this there may be a problem with your Ghost installation or there may be a different issue that is causing this.
You should never attempt to eliminate a ghost by yourself unless you’re an expert. You are dealing with a delicate and complex system that regulates your engine. This can cause damage if handled incorrectly and is extremely risky. We recommend you call the installer for assistance.
2. No ignition
Immobilisers are commonly used in modern vehicles to stop the vehicle from starting if your key is not compatible with the one that is programmed in. The immobiliser compares the transponder codes in the immobiliser against the codes sent from the key. If the codes match then the engine will be able to start. The system could fail due to various reasons, including a stolen or missing key or transponder that is damaged or one that’s not coded, or electrical problems, such as a broken immobiliser antenna wire that is located around the ignition cylinder. It is also possible that the codes are confused by multiple keys, like having a spare key, or the car has two transponders in the same key.
When the immobiliser does not work correctly, it may be difficult to start your car. This can give thieves the impression that the system is faulty and they may steal the vehicle with the pride and joy of the owner. This makes it a crucial investment for anyone who owns a car particularly those with prestige cars that are difficult to sell after being stolen or damaged.
The ghost immobiliser can be concealed in nearly any part of your vehicle which makes it virtually unnoticeable by car thieves. It makes use of the buttons on your steering wheel, doors or the centre console to create an unique PIN code sequence that you are familiar with, ensuring you are the sole person who is able to drive the vehicle. It also works silently and is not equipped with LED indicators so that thieves be unaware that it’s there. The Ghost is TASSA-accredited as well as Insurance-approved, which means it can be installed by a vetted installer. It also protects your pride and happiness from key cloning and hacking.
3. No engine start
It’s not surprising that many are looking to add an additional layer of security. With car thefts on the rise, and keyless entry vehicles becoming a major victim for thieves, it’s not a surprise that people want to add an extra layer of security. One of the best ways to achieve this is to install an immobiliser ghost 2 immobiliser cost. This innovative device safeguards your pride and joy from theft and damage with the help of some of the most advanced technologies on the market today.
Contrary to traditional systems that depend on LEDs and key fobs, the Ghost is a next generation security system that utilizes an individual pin code that only you can identify to enable you to start your vehicle. The device is connected to your vehicles CAN data network and is programmed to protect it via buttons on the dash and steering wheel. The device will not allow the engine to start until your pin code is entered first. It’s done quietly, no clicking like other systems. It’s almost impossible for burglars to detect.
It can also turn off the stop/start mode if needed. This is done differently on every vehicle, however it is generally as simple as the system stops or locks the gearbox in P. This can be done with or without the activation of the anti-hijack.
Ghost immobilisers are extremely efficient at protecting your vehicle, and can be used with any key, or even a spare. It will stop all types of vehicle theft, including key duplicates and ECU swapping. It also helps prevent car damage by detecting the sound of a vehicle or tampering. It can also help protect your vehicle’s sale value by making it less attractive to thieves.
4. No keyless entry
The last thing any car owner would want to go through is being the victim of their pride and joy taken away. You might have spent a long time saving up for your car or have an expensive vehicle that you are proud to display. Being faced with the loss of a vehicle is a very depressing experience, whether you’ve invested in it or not. Luckily, with the right security system in place, you can protect your vehicle against the most clever thieves.
In contrast to wheel locks or Faraday bags, Ghost 2 immobilisers can be discreetly installed inside your vehicle (without doing any damage to your vehicle) and will only allow your car to start if the pin code is entered correctly. This pin code is chosen by you and can be altered multiple times as you’d like. The device is also different on each vehicle, so thieves won’t even know it’s even in existence.
Ghost II links up to the CAN system of your vehicle and communicates with it via the CAN data circuit which means it is not able to be detected by the common thieves’ RF scanning or code grabbing technology. The ECU or key cannot be tampered with as only the correct pin codes will allow your Lexus vehicle to start.
Our TASSA-accredited Ghost 2 immobiliser has been accepted by insurance companies and gives peace of mind knowing your vehicle is protected from contactless theft. This will not only allow you to recover any losses that might have been caused by theft, but it will also make it difficult for potential thieves in the future to purchase your vehicle since they will be aware of the security system that prevents theft. This could help you save thousands of dollars in resales value.
5. No alarm
A ghost immobiliser, one that is highly technologically advanced and fitted to your vehicle to protect it from being stolen. It works by preventing your engine from starting unless you enter a pin code sequence that only you can be able to recognize.
This is an excellent security system to prevent theft because unlike a wheel lock or car alarm, a ghost immobiliser can’t be removed, jumped started or spoofed. If someone tries to steal your car with this method, he’ll find that the car won’t start and it will be forced to drive away without it.
The technology has advanced to deter thieves from taking the pride and joy of your life. This is the reason it’s so important to safeguard your vehicle by installing a ghost immobiliser. They are not only affordable however, they also protect your vehicle with great effectiveness.
They’re not noticeable and aren’t a lot of a deal and a burglar won’t be able to detect them. The device can also be used in conjunction with a car tracking system, so that you always know where your vehicle is and if it is secure.
The Ghost CAN immobiliser was the first aftermarket CAN bus lock. It is designed to guard against key hacking or cloning, as well as key theft. It’s also TASSA-certified which confirms its reliability. The device is installed in a secure location it operates silently and doesn’t transmit radio signals. It’s also inaccessible to the naked eye. The most appealing aspect is that it’s less expensive than a normal car alarm and will be more effective in preventing thieves from stealing your car in the first place. This will provide you with peace of mind and make your car more secure than ever before.