Minna Macghey спросил 8 месяцев назад
UPVC Window Handle Replacement
Replacing a damaged window handle is a simple process and, with the right tools, it can be done quite quickly. It is essential to know the type of handle you have and the spindle’s size before you purchase an alternative.
Older uPVC window handles have a spur which protrudes and UPVC Window Handle Replacement locks over the wedge striker. They can be right-handed or left-handed, and must match when replaced.
What kind of lock and handle do I have?
There are many windows locks and handles made of upvc, each with its particular advantages and uses. The type of handle you have will determine how easy it is to open your windows and if the locking mechanism works as intended. Over time and through regular use, window handles made of upvc can become damaged or worn out, rendering them less secure and efficient. In some cases they may even fall completely off. It is important to repair your upvc window handles as soon as you see them falling off. This will stop possible burglaries and ensure that your home is secure.
The good news is that replacing your window handles made of upvc is a relatively simple task that can be done by almost anyone. You will need a few tools, but with right knowledge, it is simple and should take only a couple of minutes. It is important to know the type of handle or lock that you have on your window. This will allow you to choose the correct replacement.
Inline Espagnolette Handles
They are usually found on the outside of the window. They are flat and have an open latch that is connected to the locking mechanism of the window frame. Inline upvc handles also have spindles that run through the centre of the handle, and into the frame of the window to activate the latch.
Cockspur Handles
They are usually found on older uPVC windows and feature a distinctive hook-shaped design. Cockspur handles are secured to the frame of the window with only one screw and are less secure than other kinds of window handle.
Handles that can tilt and turn
In contrast to other upvc handles the tilt and turn handles can be turned to open the windows and turned inwards to allow for ventilation. Generally, they feature a 7mm spindle on the back of the handle and are available in left and right-handed versions.
It is essential to know the size of the spindle when purchasing a new upvc handles. Not all of them are exactly the same size. Drop something into the middle of the hole to check the length. This is the maximum size of spindle that will fit your windows.
What is a spindle?
uPVC window handles operate similarly to doors. By turning the handle, you will be able to activate a latch inside the frame. The latch opens the window, so it can be shut and opened. The handles could be damaged, particularly if they’re frequently used or subjected to harsh conditions. You may have to replace the handles on your uPVC window if they’re not functioning correctly.
There are a variety of uPVC handles available comprising Espag, Cockspur and Spaded handles. These handles are designed to fit inside the uPVC frames in various ways, and each type of handle uses a specific spindle to lock the mechanism fitted to the window. It is essential to determine the kind of handle that is installed on your uPVC windows so that you can replace it with the right one.
The base section of the handle will inform you what kind of uPVC it is. There should be a’snap in cover’ over one screw that holds the handle base in the correct position. Once you remove this, you will be able observe the second screw that holds the handle base in place. Once both screws have been removed then you should be able to pull the handle from the uPVC.
Once you have removed the uPVC window handle you need to carefully unscrew the old spindle from the locking mechanism. Be sure to note the length of the spindle, as you’ll need to make sure that you purchase an alternative that is the same length as your original handle and locking mechanism.
The most common issue with window handles made of uPVC is that the handle spindle gets worn out and can no longer function properly with the locking mechanism. This could be due to wear and tear from continuous use or loosening of the locking mechanism or even corrosion that occurs over time. When this happens it will be necessary to replace the window handle and the locking mechanism to restore complete functionality to your uPVC windows.
How do I remove my old handle?
Window handles can become damaged or destroyed over time. It is important to repair them as quickly as possible to ensure your safety. It is good to know that replacing a worn or damaged handle is a fairly simple task that can be completed in less than a minute and doesn’t require any specialized tools.
To remove the old handle, first remove the screw located at the bottom of the handle. After this screw is removed, the handle can then be pulled away from the base. Another screw will be located at the bottom of the handle. It can also be removed. After both screws are removed, the handle can be removed completely from the base section of the window.
Once the old handle is removed, grab the new handle and align the fixing holes with the holes present in the window frame. If there is a sticker or cap on the new handle, remove it if needed and screw the handle in the appropriate position. It is essential to ensure whether the handle functions after it is installed. Turn the handle around and ensure that the lock mechanism is in place.
Espag handles have an extra spindle that is protruding from the handle and slots into a multipoint locking mechanism inside the window frame. Cadenza windows come with a blade with cutouts that fit into the lock mechanism. Cockspur handles are long and are hung over the frame of the window or the transom crossmember of the bar.
Once you have the new handle in place, you can insert the spindle into the window lock and then tighten it. When the handle is fixated and secured, replace the snap-in cover and the screw cap (if necessary). The handle is now ready for use, so try opening and closing the window several times to make sure that it functions well and securely.
How do I install the new handle?
Changing your uPVC double glazed window replacement handle isn’t difficult, and the process is quite simple. All you require is a screwdriver, and a small amount of patience. First, make sure that the handle that you are replacing is unlocked. Remove any visible screws. You can also replace them with screw caps. After removing the handle you’ll need to record the length of spindle that extends from the back. This is crucial because it will determine the kind of handle to buy.
Espagnolette handles that are made of uPVC are the most well-known type of handle. The spindle is inserted into the handle to activate the locking mechanism inside the frame of the window. When the handle is turned it releases the latch on the window and allows it to open. When used regularly and time, handles for espagnolette may become damaged.
Cadenza handles are a type of uPVC handle that is commonly used with tilt and turn windows. They have an elongated blade that functions as the multipoint locking mechanism inside the window. They are usually more secure than handles made of espagnolette because they are only accessible from the inside. They can be replaced using the same method as espagnolette handles but you must make sure that the new handle has an angled blade as opposed to a flat one.
Once you have selected the correct handle, simply align the new handle with existing screw holes before screwing it in place. After that, you should put the screws back on and make sure your new handle is operating correctly. You can do this by dragging the handle between the locked position to the unlocked several times. It may be worth contacting an expert to see whether you can solve any issues. They will often be able to guide you on the best approach to solve the issue in a fast and effective manner.