Iva Booth спросил 8 месяцев назад
Protect Your Pride And Joy With The Ghost Immobiliser
Guard your precious possessions from theft by using the Ghost Immobiliser. It is discreet and does not require any additional key fobs.
The device utilizes buttons on your vehicle (steering wheels doors, door panels and the centre console) to generate a unique pin sequence that can be modified up to 20 times. This will then allow your vehicle to begin.
Simple process to change the PIN code
With the rising rate of vehicle theft, a lot of owners are seeking to improve their security. There are a variety of aftermarket security devices that range from tracking systems to alarms and immobilisers. However there are a few that are equally effective in protecting your car. A tracking system can aid in finding your vehicle in the event of it being stolen, but it will not prevent the crime. Immobilisers, on the contrary are exactly what they say on the label — they disable your car’s motor so that it isn’t able to be started. The Autowatch Ghost is one of the most advanced options available, making it nearly impossible for thieves to steal your vehicle.
The ghost device makes use of the buttons on your car to create a unique sequence that must be entered in order for the engine to start. This can be done using the window, heater or indicator stalk buttons. There is also a mobile application that can be used as an emergency PIN override, which allows the driver to operate their car without having to use the button sequence. This option is particularly useful when you need to hand your car over to a valet service or parking, as the immobiliser will remain activated and not disabled.
The Ghost is a unique and innovative device which works in conjunction with buttons on your vehicle rather than as a separate unit. This means that it is not only a highly effective protection against theft of your vehicle, but it can also be transferred over to any future cars you may own, making it much more investment-wise than the traditional lock on your steering wheel.
Small device that is weatherproof
The Autowatch Ghost Immobiliser is an advanced security system that safeguards your vehicle from key hacking and cloning. It also prevents ECU swapping. It’s a weatherproof and small device that connects directly to your vehicle’s ECU via the CAN data bus, which disables the engine. It can be plugged into the vehicle without the need for extra wiring and ghost Immobiliser Fitting near me has been extensively tested to ensure it works with all vehicles. It is also resistant to jamming devices that are a common technique used by thieves to bypass existing immobilisers.
The advantage of CAN data over conventional systems is that they work silently. It is not able to be detected by sophisticated RF scanning and code-grabbing techniques as well as identified by conventional diagnostic tools. The autowatch ghost immobiliser fitting ghost doesn’t produce LED indications and uses the buttons in your vehicle such as steering wheel, centre console or door panels to create a unique, changeable disarm sequence. You can even make this sequence as long as 20 presses to provide additional security. The iPhone app allows only one connection, and comes with an individual pairing code for the Ghost. All communication between the two devices is encrypted.
The Ghost stops car thieves from adding an ignition key that is not in use or replacing the ECU to bypass the immobiliser. The engine will only start if a valid PIN code has been entered. It can also be put in valet/service mode to allow for temporary operation (with defined parameters like a 30mph speed limit) to allow you to give your car to a valet service or to be serviced without needing to enter a PIN code.
Each vehicle is tested
The Autowatch Ghost is a world-first aftermarket immobiliser CANbus. It can be connected to the vehicle’s wiring and also to the engine control unit (ECU). The device is able to intercept signals and stop your car from starting normally until you enter a specific code. The system can be activated or deactivated using your own smartphone application without the need for wires.
Standard factory immobilisers for automobiles function through an electronic transponder in the key that sends an electronic signal to the ECU. The car will begin to start if the correct code is sent. If, however, the transponder of a different vehicle is used instead, the immobiliser will not recognize it. This makes it possible for the vehicle to be stolen and then started. A South African company that is at the forefront of car security systems technology created the ghost immobiliser 2 immobiliser. It shields you from hacking or key cloning and even key theft. The only way a thief could steal your car is by physically towing it away and even then they wouldn’t be allowed to drive it.
Ghost makes use of the buttons on your vehicle, including the indicator stalk as well as the steering wheel and door panels to generate a unique PIN sequence that can be changed that must be entered prior to you can drive. This is not required to use additional hardware, such as key fobs and can be as long as 20 presses long. It is also unrecognizable to diagnostic equipment and does not transmit radio frequency signals, which means thieves are not able to make use of sophisticated RF scanning or code grabbing techniques to determine if a security system has been installed.
In contrast to the physical devices that prevent theft, such as clamps or wheel locks, Ghost is covertly integrated into the vehicle to ensure that it can’t be removed or disabled by thieves. It is also harder to remove than a car alarm, which requires disarming with the use of a button sequence. This makes it a great alternative to a GPS tracker that can assist in locating your vehicle after it has been taken.
Override of emergency PIN code
You don’t need to look far on social media to find stories or even videos of vehicles that were stolen by car thieves employing the latest technology tools available to them. This includes key-cloning and hacking tools that allow you to start your car without the original key fobs.
Our Ghost Immobiliser Fitting Near Me immobiliser is designed to stop this and offer an additional layer of security to prevent your vehicle from being targeted by thieves. It generates a unique pin code by pushing the buttons on your steering wheel, door panel, and on the centre console. The unique pin code is entered alongside your original key fob to prevent the engine from starting. The unique override pin can be found on the black card that you will receive after installation. It is simple to remember because there aren’t any LEDs.
The device is hidden in the wiring of your vehicle and doesn’t emit radio signals. This means it can’t be detected using diagnostic software that can determine the type of security system you have installed. This makes it a great alternative to a tracking device.
Unlike most other security systems, which have a relay in the engine bay, CANBUS Immobilisers communicate with the car’s ECU and BCM via CAN data bus (brand dependant). This allows them to disable the vehicle completely with a digital block of commands for both the ECU and the engine.
They can also be connected to a separate analogue alarm, immobiliser or tracker. This should be specified prior to the installation. They are also service/valet mode compatible and a great alternative to a tracker if you are having your car in for an electrical fault at the dealer.
Service/Valet mode
In recent times, there has been an increase in vehicles being stolen with the owners’ keys. With the ease of access to key cloning tools and door lock pick sets it is now easier than ever for thieves to steal your joy and pride. We have developed the Autowatch Ghost Immobiliser to combat this. It prevents your car from being driven, even if you keys have been copied.
It directly communicates with your car’s ECU (Engine Control Unit) via the data loop of CAN. It’s completely silent as it doesn’t utilize radio frequencies or keys fobs. This means it isn’t detected by diagnostics or other vehicle hacking devices. It also prevents the addition of the key to a new one or replacing the ECU to get around the system, since only the correct PIN code will allow the engine to start.
The device is concealed inside your car using existing buttons on the steering wheel, centre console and Ghost immobiliser fitting Near me door panels. A unique and reversible PIN code sequence that can be as long as 20 digits has to be entered before you are able to start your vehicle.
This is the first aftermarket CAN-bus immobiliser for the market that is being developed. It can prevent your vehicle from being driven or started if you don’t enter a PIN number first. If the device is activated and you try to drive away, it will display an indicator on your dash which will flash on a regular basis for approximately 300m. If you enter your PIN code during this time, it will deactivate the anti-hijack system and your vehicle will continue to drive in the normal way. If you do not enter your PIN at this point, the warning will keep flashing & will require a new PIN code for every attempt to start your vehicle.