Francesco Hardey спросил 7 месяцев назад
Ghost Immobiliser Installation
Add a ghost immobiliser your vehicle to protect it from car thieves. Our TASSA certified system guards vehicles against hacking, key cloning and vehicle immobiliser bypass.
The system is hidden inside the wiring loom of your vehicle, so it is completely invisible to anyone who looks. It operates by creating the pin code push sequence through buttons already present on the steering wheel doors, door cards, and the central console.
No circuit cuts
A car is a prized asset that you put in many years of effort to obtain, which is why car owners would want to secure their vehicle against theft. However, traditional security devices such as alarms and wheel locks can easily be cut off or jumped by thieves. A ghost immobiliser is a extremely effective solution that works in a quiet manner and isn’t easily recognized by modern day thieves.
A ghost immobiliser or a hidden device is a device that connects with your vehicle’s data network CAN to disable the engine. It does this without using key fobs or radio frequencies. It communicates with the vehicle’s ECU by using buttons on the steering wheel, dash and door panels to generate a unique pin code that only you can access. The code can be changed at any time, and can have up to 20 digits based on your preference. It also comes with a secure emergency code that you can utilize should you forget your PIN.
The ghost immobiliser can be used to block relay boxes from transmitting the car key’s signal within your home, which could unlock the doors and then start the vehicle. It could also block the latest advanced methods of stealing your vehicle such as OBD port hacking. The device is tiny and weatherproof, Ghost immobiliser Fitting meaning it’s difficult to detect and even harder to tamper with.
The ghost immobiliser has another benefit: it can be inserted into your vehicle without leaving any permanent marks. It is ideal for people who are planning to sell their car in the near future. It’s also faster and simpler to install as when compared to a factory-fitted model.
The Autowatch Ghost is a groundbreaking next-generation device that blocks contactless stolen cars by connecting to the vehicle’s CAN data network and utilizing existing buttons to create a unique PIN code. This is a stealthy system that can be put in place without removing wires and does not require any additional key fobs. It also connects to the original ECU of the vehicle, thus preventing thieves from using a different key. This system is TASSA-certified and is compatible with an International Security Register. Owners will have peace of mind knowing that their vehicle is secured from theft.
No scanning with RF
You’ll want to secure your vehicle from theft if you have spent an enormous amount of money and effort to customize it. One of the best ways to accomplish this is to install an immobiliser. This will stop your engine from starting unless you enter a unique pin code. You can create a 20-digit pin using the buttons on your dashboard or steering wheel. This will ensure that only you are allowed to drive your car. You can also create a valet and service mode that allows you to temporarily start your car without having to enter the PIN code. This allows technicians to work on your vehicle, without being present. This is an excellent option for people who are looking to save time and make their lives easier.
A ghost immobiliser is a next-generation device that connects to your vehicle’s CAN data network and utilizes the buttons on the steering wheel and dashboard to programme a personalised PIN code. It is designed to be stealthy and has no LED indicator or noise to give it away and can be installed anywhere on your vehicle without affecting the appearance of your pride and joy.
This stealthy device is TASSA approved and can cut down on your insurance costs. It has a tracking feature that can locate your vehicle, even if it’s stolen. This is useful if you own a unique or expensive vehicle that you’ve invested lots of time making it your own.
The Autowatch Ghost can be used in conjunction with an iPhone application that allows you to start your car remotely if you forget your PIN or are not able to enter the vehicle for some reason. This feature is perfect for those who need to take your kids to school or run errands, but don’t want to put yourself at risk by letting having someone else drive your vehicle. It is also helpful when you have to take your vehicle in for servicing or repair.
The Ghost has the advantage that it doesn’t transmit or detect radio frequency and is therefore undetectable by thieves using RF scanning and code grabbing techniques. It can also safeguard your car from key cloning and ECU swapping as well as other common methods of car theft.
There is no key to cloning
ghost Immobiliser fitting (akvalife.by) immobilisers can be an excellent way to safeguard high-end cars and prevent key copying. They stop your car from starting until an additional PIN code is entered in conjunction with the standard key fob. This makes it more difficult for thieves to steal your vehicle, and could discourage them from trying. This is a good idea if your vehicle has been heavily modified or is rare.
These immobilisers are connected to the vehicle’s CAN data network onboard and are completely hidden meaning that their presence is not evident. It is also impossible for a burglar to locate the device using radio frequency scanning or code grabbing technology. This means a thief would have to spend more time to take your vehicle.
A criminal must be aware of the pin code and the location of the ghost in order to get around it. But, the pin code is specific to you and may be changed as often as you’d like. The pin you select is easy to remember, but mathematically impossible for anyone else to decipher. The engineer will also have provided an emergency pin code in case you forget your pin.
The ghost immobiliser review CAN Bus immobiliser can be easily mounted anywhere on your vehicle. It works with all vehicles and is fully customisable to match the style of your car. It is also very affordable and simple to use. You can even transfer the device to a different vehicle if you switch cars during the lifetime of ownership, provided that the new vehicle is compatible with the.
The immobiliser for the CAN bus is compatible with a variety of other security features. For instance, it could detect the damage to your vehicle and alert the owner. It also can shut down the engine if the car is damaged. It also helps protect your vehicle from key cloning and hacking. It can also detect vibrations or contact with the vehicle. In addition, it can warn the owner if the vehicle has been moved.
No OBD port hacking
Ghost employs an immobiliser hidden in the module that is connected to your vehicle’s CAN data network which stops thieves from gaining access to your vehicle to disable the alarm, deactivate the key fob and generate new keys. This technology is a step up over the old methods used by thieves to steal vehicles in the past. The CAN data network also means that the system will not be affected by disconnecting or replacing your battery.
The Autowatch Ghost is the world’s first aftermarket CAN bus non-detectable immobiliser that safeguards against key-cloning, hacking and copy-cat car theft. It doesn’t use LED indicators or key fobs. Instead, Ghost Immobiliser Fitting it uses the buttons on your steering wheel, console and door panels.
Modern thieves use diagnostics to detect circuit cuts in your vehicle. They are able to bypass immobilisers that require lots of wiring or are integrated into the wiring. The Ghost is weatherproof and does not require any additional wiring. It cannot be identified by diagnostic tools that are professional. It can even be fitted on vehicles with anti-theft equipment.
Another advantage of a Ghost immobiliser is that your vehicle is only able to be started by a person who has access to the PIN number and has physical access to your car. This is a significant advantage over traditional security systems which can be tampered with using simple cable alteration, a screwdriver or the utilisation of an universal remote controller.
If you forget your PIN, you can reset it using the emergency PIN reset function on a mobile device or computer. This is a great option if you need to start your car when it’s left in a garage, or valet parking.
The Autowatch Ghost 2 has been approved for insurance by TASSA and is able to be installed by our authorised installers. It features the QR fingerprint system to allow individual parts to be identified which will allow the return of stolen parts should they be discovered, and can also be turned into a’service mode’, which will allow the engine to start when your car is in a garage or using a valet parking service however, you will need to enter your PIN code to leave the vehicle.